Datalogic AccuLazr AL5010, Product Line Manual

Page: 76 / 240

68 Setup AccuLazr™ AL5010 Product Line Manual
Modify Settings > Serial Communications
Use the Serial Communications menu tree selections to set the serial port
connection parameters including:
•
Baud Rate
•
Data Bits
•
Stop Bits
•
Parity
•
Flow Control
•
Message Format
Individual settings can be made for Serial Port 1 and Serial Port 2. If the User
Defined Message format is selected, an addition tab screen is supplied for
creating unique message definitions.
Serial Port 1 and 2
Use Modify Settings > Serial Communications > Serial Port 1 (or 2) to
define the format of message the reader sends to your host computer (or
other device) connected to Serial Port 1 (or 2).
To set or modify the communications parameters for Serial Port #1:
1. Go to the Serial Communications Port#1 screen.
2. Click a Baud Rate option group button.
3. Click a Data Bits option group button.
4. Click a Stop Bits option group button.
5. Click a Parity option group button.
6. Click a Flow Control option group button.
7. Select a Message Format from the drop-down list.
8. Click
Update
. 0.
Message Definitions
When any option, other then the Standard Message selection, under the
Message Format item is selected a Message Definition tab is made
available.
Creating User-defined Messages
NOTE:
Use the same procedure to create user-defined
messages for both the serial (Modify > Serial Communications
Port #1 or Port #2) and network communications (Modify >
Network Settings).
Accu-Sort Systems, Inc. 05-AL5010_Setup_R20.doc