DKG-309 User Manual V-02
(11.05.2009)
- 27 -
13. PROGRAMMING
The program mode is used to program the timers, operational limits and the configuration of the
unit.
To
enter the program mode
, press together
◄
MENU
and
MENU
►
buttons for 1 second.
The program mode is only allowed if the
PROGRAM LOCK
input is left open. If this input is tied to
GROUND
, the program value modification will be disabled to prevent unauthorized intervention. It is
advised to keep the
PROGRAM LOCK
input tied to
GROUND
.
The program mode will not affect the operation of the unit. Thus programs may be modified
anytime, even while the genset is running.
The program mode is driven with a two level menu system. The top menu consists on program
groups and each group consists of various program parameters.
When program mode is entered, a list of available groups will be displayed. Navigation
between different groups are made with
▼
and
▲
buttons. Selected group is shown in reverse video
(blue on white). In order to enter inside a group, please press
MENU
►
button. In order to exit from the
group to the main list please press
◄
MENU
button.
Navigation inside a group is made also with
▼
and
▲
buttons. A list of available parameters
will be displayed. Selected parameter is shown in reverse video (blue on white). In order
display/change the value of this parameter, please press
MENU
►
button. Parameter value may be
increased and decreased with
▼
and
▲
buttons. If these keys are hold pressed, the program value will
be increased/decreased by steps of 10. When a program parameter is modified, it is automatically
saved in memory. If
MENU
►
button is pressed, next parameter will be displayed. If
◄
MENU
button is
pressed, then the list of parameters in this group will be displayed.
Program parameters are kept in a non-volatile memory and are not affected from power
failures.
To
exit the program mode
press one of the mode selection keys. If no button is pressed
during 1 minute the program mode will be cancelled automatically.
