E F 3 0 1 5 S e t u p G u i d e ( R e v A )
27
4
Basic Operation
Verify that you have completed the sequential “Installation Checklist” instructions given in
. Once you have successfully completed steps 1 through 8 therein, you
can access the management interfaces using your web-browser.
4.1
Accessing RAIDar
Upon completing the hardware installation, you can access the controller module’s
web-based management interface, RAIDar, to monitor and manage the storage system.
Invoke your web browser, and enter the IP address of the controller module’s network port
in the address field (obtained during completion of “Installation Checklist” Step
press
Enter
. To sign in to RAIDar, use the default user name
manage
and password
!manage
.
This brief Sign In discussion assumes proper web browser setup.
IMPORTANT :
For detailed information on accessing and using RAIDar, see the
“Getting Started” section in the EF3015 RAIDar User Guide.
In addition to summarizing the process to configure and provision a new system for the first
time — using the wizards — the Getting Started section provides instructions for signing in
to RAIDar, introduces key system concepts, addresses browser setup, and provides tips for
using the main window and the help window.
TIP :
After signing into RAIDar, you can use online help as an alternative to
consulting the user guide.
4.2
Configuring and provisioning the storage system
Once you have familiarized yourself with RAIDar, use it to configure and provision the
storage system. Refer to the following chapters within the RAIDar user guide or online help:
• Getting started
• Configuring the system
• Provisioning the system
• Using AssuredRemote to replicate volumes
