2X16SP-1000BT
24
© 2007 Datacom Systems Inc
4.3
Daisy-Chain Installation
This section will focus on a simple daisy-chain configuration describing the typical hardware
daisy-chain installation of four 2X16SP-1000BT Gigabit SPAN Matrix Switches.
4.3.1
Daisy-Chain Power, Network, Management Connection
NOTE:
Only the first 2X16SP-1000BT Gigabit SPAN Matrix Switches in the daisy-chain must
have its IP Address configured prior to installation in the daisy-chain. Refer to the 'IP
Address in the Installation' section.
NOTE:
The 2X16SP-1000BT Gigabit SPAN Matrix Switch label
0
in the diagram is the first
switch in the daisy-chain,
1
is the second switch in the daisy-chain,
2
is the third switch in
the daisy-chain and
3
is the forth switch in the daisy-chain.
NOTE:
All the daisy-chain switches are managed through the first switch in the daisy-chain.
Step 1.
Refer to 'Power' under the 'Hardware Installation' section for the directions to connect
each switch in the daisy-chain to a power source.
Step 2.
Refer to 'Network Connection' under the 'Hardware Installation' section for the
directions to connect each
NETWORK PORT
socket in the daisy-chain to a network.
Step 3.
Refer to "Management Connection' under the 'Hardware Installation' section for the
directions to connect the
MANAGEMENT
port socket in the daisy-chain to a remote
management network.
