2X16SP-1000BT
18
© 2007 Datacom Systems Inc
Step 7.
You are now connected to your 2X16SP-1000BT Gigabit SPAN Matrix Switch. Hit
the
Enter
key twice in succession (i.e.,
Enter
,
Enter
) to display the
Command shell
prompt and
type
?
to see a list of available commands.
Step 8.
Set the IP address by typing SET IP xxx.xxx.xxx.xxx where xxx.xxx.xxx.xxx
corresponds to a valid IP address for your network. Press the
Enter
key to continue.
Step 9.
Set the default gateway (if needed) by typing SET GATEWAY xxx.xxx.xxx.xxx
where xxx.xxx.xxx.xxx corresponds to your network's default gateway. Press the
Enter
key
to continue.
Step 10.
Set the subnet mask by typing SET SUBNET xxx.xxx.xxx.xxx where xxx.xxx.xxx.
xxx corresponds to your network's subnet mask. Press the
Enter
key to continue.
Step 11.
Type EXIT to save the network address changes and end the HyperTerminal session
your network. Press the
Enter
key to continue.
