Datacolor 45IR User Guide, 5.2014, Version 1.0 (4230-0402M)
13
Switching On and Off
Datacolor 45IR is switched on by pressing the green measurement button. It is immediately ready to measure. In
this state power consumption is very low.
If no button is pressed within one minute, the device will switch off automatically. Switching it on again with
the green measurement button will show on the display the last measurement done. There is no button to
turn Datacolor 45IR off.
Battery
The Rechargeable NiMH battery has regulated charging via the Charging Console connected to the AC Adapter,
when the instrument is mounted and seated on the Charging Console.
The Datacolor 45IR battery supplies 10,000 measurements per charge
There is an Active Battery Level indicator, shown below. When the battery is discharged the battery indicator
turns to a red color.
When the battery is depleted the user is prompted to charge the NiMH battery. See the section following.
