DataCard CR825, Installation And Administrator'S Manual

Page: 133 / 140

CR825 and CE875 Instant Issuance System Installation and Administrator’s Guide A-13
Load Embosser Supplies
Embossing supplies include topping foil and indent ribbon. The topping foil is applied to the
embossed characters and can be applied to up to five lines of characters. The indent ribbon is
used to apply black or white color to a single line of indented characters.
If the embosser supplies are preloaded into their cartridges, install the cartridges into the
embosser.
Load the Indent Ribbon Cartridge
1.
Prepare the indent ribbon cartridge and indent roll.
a.
Open the embosser supplies access door and
remove the indent ribbon cartridge from the
embosser, if necessary. The indent ribbon
cartridge is on the right as you face the open
embosser.
b.
Place the indent ribbon cartridge on a flat
surface with the spindles facing up.
c.
Remove the new indent roll from its package.
IMPORTANT! Do not separate the silver take-
up spool away from the blue supply spool.
2.
Secure the blue supply spool into the spindle.
a.
Match the keyed pattern of the supply spool hub
with the left side spindle.
b.
Push the supply spool into the spindle until it
clicks securely into place.
The topping foil and indent ribbon cartridges are not interchangeable. They fit only
into the designated cartridge areas.
Supply
Spool
Take-up
Spool