NACE: 610-429-1511 | [email protected] | www.datatronix.biz | DT-IPTV-QAM-12C-SD Manual v1.0 Page 12
Note:
The DT-IPTV-QAM-12C-SD allows the integrator the ability to set the output channels independently of the other 11
output channels.
Example 1: Example 1 shows RF1- RF2 with a small frequency separation.
Example 2: Example 2 shows RF3- RF4 with a large frequency separation.
Note: If the RF is disabled, the frequency will not be occupied.
- If a stream is disabled, the stream will occupy the channel frequency even if not present in the RF diagram.
- Enable/Disable of the RF Output will show on the Status (ACTIVE/OFF).
Disable RF/QAM:
The DT-IPTV-QAM-12C-SD offers the integrator the ability to disable a RF QAM.
To disable a RF (QAM) output, “uncheck” the checkbox associated with the RF QAM.
Application Note:
When installing, each RF Output must have a unique
RF Output TS ID.
We highly recommend you save your encoder configuration files
.
See Administration tab for how to backup device settings.
