Chapter 5
34
35
Analog Input Subsystem 01
Return
36
Isolated Analog Common
37
Analog Input Subsystem 00
Return
a. +5 V output is available only when one of the subsystems is activated, which, in turn, activates
power to the module. You can externally power the +5 V isolated output signal. This allows
you to retain the last value that was written to the digital output lines when the DT9820 Series
module is in low-power mode.
Table 5: Pin Assignments for Connector J1 on the DT9820 Series Function
Modules and on the STP9820 Screw Terminal Panel (cont.)
Pin
Number
Signal Description
Pin
Number
Signal Description
Summary of Contents for DT9820 Series
Page 1: ...DT9820 Series UM 18219 B Getting Started Manual...
Page 20: ...Chapter 2 12...
