Data Translation DT9820 Series, Getting Started Manual

Page: 27 / 76

Installing a Function Module
19
3
3
3
3
3
3
3
3
3
4. If you previously installed the DT9820 Series Device Driver,
ignore the remaining steps, and repeat steps 1 to 3 until you have
attached the number of hubs (up to five) and function modules
(up to four per hub) that you desire.
If you have not yet installed the DT9820 Series Device Driver, the
New Hardware Found wizard appears. Click Next to have the
wizard search for the DT9820 Series Device Driver.
5. Click the option to search for the driver, then click Next.
6. Click the option to specify the location, then enter
x:\Products\Core\DT9820
as the path from which to copy files
(where x is the letter of your CD-ROM drive), then click Next.
7. Click Next.
8. Click Finish.
A New Hardware Found dialog box appears indicating that Windows is
installing the driver for the USB device.
9. Repeat steps 1 to 3 until you have attached the number of hubs
(up to five) and function modules (up to four per hub) that you
desire. Refer to
Figure 3 .
The operating system automatically detects the USB devices as they are
installed.