Data Translation DT340, Getting Started Manual

Page: 40 / 70

Chapter 5
32
This chapter describes how to wire signals to the STP340 screw
terminal panel.
Note: If you are using a screw terminal panel other than the
STP340, refer to page 53 for additional wiring considerations.
Install the Board and Load the Device Driver
(see Chapter 3 starting on page 13 )
Wire Signals
(this chapter)
Verify the Operation of the Board
(see Chapter 6 starting on page 45 )
Attach and Configure the Screw Terminal
Panel (see
Chapter 4 starting on page 25 )
Prepare to Use a Board
(see Chapter 2 starting on page 5 )