Data Translation DT340, Getting Started Manual

Page: 22 / 70

Chapter 3
14
Note: All DT340 boards are factory-calibrated and require no
further adjustment prior to installation. If you are using the DT340
board and decide later to recalibrate it, refer to the DT340 User’s
Manual for instructions (see
page 11 for information on viewing this
manual).
Install the Board and Load the Device
Driver (this chapter)
Wire Signals
(see Chapter 5 starting on page 31 )
Verify the Operation of the Board
(see Chapter 6 starting on page 45 )
Attach and Configure the Screw Terminal
Panel (see
Chapter 4 starting on page 25 )
Prepare to Use a Board
(see Chapter 2 starting on page 5 )