6
9. Click the “Configuration: tab on the left. Then click on the “Network” tab across the top of the
screen. The IP address page will appear.
10. You may now enter or change the IP address (if applicable) by entering the IP under Eth0 IP
address Main box and NetMask main box. The default setting is DHCP
11. Click Submit after entering the IP address.
12. It will take approximately 5 minutes for the IP address change to take effect. The idap card
may have to be manually rebooted by cycling the dap4 power ON and OFF if the reboot com
-
mand does not respond. Wait for one minute after the card has been restarted then access
