47 • dap4 User Manual
MENU L - Configure I/O
(factory use only)
Menu L is a factory for configuring the unit’s digital inputs and the unit’s analog inputs and outputs.
This requires the Factory Level password and entry should be limited to Data Aire factory
and service personnel.
▼ Press the UP or DOWN key until “L. Configure I/O” appears and is highlighted. Press the
ENTER key.
The following will be displayed (values are for reference only):
Move the cursor by pressing the ENTER key. Move the cursor to change the setting.
The following can be changed by pressing the DOWN key:
Channel – Open or Closed
Delay – the range is 0 – 999 seconds
Status – Open or Closed (Status can’t be changed.)
Once a selection or selections have been made, move the cursor to the title block by pressing the
ENTER key
▼ Press the DOWN key to view the next screen:
The following will be displayed (values are for reference only):
Move the cursor by pressing the ENTER key. Move the cursor to change the setting.
Digital Input
C1 LOW PRESSURE SW
Channel ID2
Action: Open
Delay: 5s
Status: Open
Digital Input
C1 HI PRESSURE SW
Channel ID1
Action: Open
Delay: 5s
Status: Open
