26
9.1.7 DATE STAMP
The
Date Stamp
stamps the time and date of recording on your photos giving you a
chronological record of your travels.
To activate
Date Stamp
please follow the instructions below.
1.
Press the (OK) button to stop your Dash Cam from recording.
2.
Hold the (Menu) button for 2 seconds to enter
Still Mode
.
3.
Press the (Menu) button to enter the
Still menu
.
4.
Use the
and buttons to navigate the
Still menu
and highlight the
Date Stamp
setting and press (OK) to select.
5.
Select Off or On and press the (OK) button to confirm.
__________________________________________________________________________________________________________________________
NOTE:
•
Menus cannot be accessed while the Dash Cam is recording. Please stop the recording to access the menu.
•
Date Stamp can only be accessed from the Still Menu
__________________________________________________________________________________________________________________________
10 SETTINGS MENU
The
Settings
menu is used to edit the camera operational settings.
The
Settings
menu can be accessed from either the Video or Photo Mode by pressing the
(Menu) button to access the menu, then pressing the (Menu) button again which will open the
Settings menu
.
While in this menu the and buttons can be used to highlight a setting and the (OK)
button is used to select.
