Dascom TALLY MIP480, User Manual

Page: 52 / 138

Using Special Mode
4-18
Safe Panel
•
If the value of safe panel is “YES”, READY, PARK and LOAD require the ALT key to
be used as a two key operation for these functions in Normal Operation Mode of
printer.
•
If the value of safe panel is “NO”, READY, PARK and LOAD key are operated as Nor-
mal Operation Mode, ALT key is not required.
Recalling Factory Settings
Factory settings are those settings pre-selected at the factory. To recall (reset) the factory
settings, select the RCALL-FACT function and press the ALT-NEXT key or the ALT-PRE-
VIOUS key.
Options under the MACRO, INSTALL, and Adjustment functions are all initialized to the
factory settings.
<STOP BIT>
Word Length setting
Select the same word length setting that is
used by your computer or modem.
1 BIT
1 Stop bit per data byte
2 BIT
2 Stop bits per data byte
<BUFFER CTL>
The ready/busy control method.
DTR
Hardware control via the DTR lead.
XON/XOFF
Data control using DC1 and DC3 control
characters.
6820 PROT
For 6820 emulation
<DISC FAULT>
Disconnect on a fault condition
NO
Do not disconnect.
DROP DTR
DTR will change to inactive state.
PULSE DTR
DTR will pulse to inactive and then back to
the normal active state.
<PWRDWNHRS>
Sets time after which Sleep Mode is automat-
ically activated
0
Disables Sleep Mode
1-96
Hours after which Sleep Mode is automati-
cally activated
INSTALL Options Values Description