Dascom TALLY MIP480, User Manual

Page: 107 / 138

Command Sets
C-13
the first byte except “A”,”B”, or “C”, the printer will ignore all the data for barcode.
Character Set 1st byte meaning
A
B
C A (41 hex)
B (42 hex)
C (43 hex) Start character set A (Code A)
Start character set B (Code B)
Start character set C (Code C)
9) In the case of CODE 128 and character set C, if received data strings is an odd number
(if check digit flag is on, the check data includes this number) the printer will add
a zero “0” character to the most digit.
10) In the case of CODE 128, the printer does not print both special function code of
CODE 128 and ASCII function code for the human readable character.
11) In the case of CODE 128, even if the printer finds undefined code
after the character set is changed by the function code, the printer will ignore
all the barcode data defended by data length parameter “n1,n2”,
and no barcode print is performed.
12) When a paper empty error is occurred during barcode printing,
the printer will stop printing and cancel all the barcode data already received.
13) When the module parameter is set to 1(m=1), the printer will always ignore
the human readable flag. And also, if the printer finds out there is no space to print
the human readable character in the barcode area, the printer may ignore
the human readable flag.
Cut Sheet Feeder Control*
Eject a page from the printer* ESC EM R
Miscellaneous
Unidirectional printing on/off ESC U ( n )
(on: n = 1, off: n = 0)
Add a carriage return to all line feeds ESC 5 ( n )
(on: n = 1, off: n = 0)
Printer offline ESC j
Select default settings ESC [ K ( n
1) (
n
2) (
i ) ( ID ) ( p
1) (
p
2)