Dascom TALLY MIP480, User Manual

Page: 29 / 138

Paper Handling
2-21
Switching from Single Sheets to Continuous Forms
To switch from single sheets to continuous forms:
1 If a sheet of paper is loaded, remove the paper by pressing the FF/LOAD key.
2 Move the Paper Select lever to the continuous forms position.
3 Press the FF/LOAD key. The continuous forms paper advances from the park posi-
tion to the top-of-form position.
You are now ready to print using continuous forms paper.
Tips on Paper Handling
General Tips
•
Use high-quality paper. Do not use paper that is wrinkled or curled at the edges.
•
Do not use paper with staples or metal parts.
•
Do not use paper with unpredictable variations in thickness, such as paper with partial
multilayers, paper with embossed printing.
•
Store paper in a clean, dry environment.
Multipart Forms
•
Avoid using carbon-interleaved single sheets if possible. Printing tends to become
misaligned on the bottom sheet.
•
Set the paper thickness lever to best accommodate the multipart form thickness.