Dascom Tally DP-550, User Manual

Page: 44 / 73

Appendix E – Using the Wi-Fi
®
Interface
Wi-Fi
®
Interface Configuration
When using Wi-Fi
®
communications, the interface parameters set in the printer must match settings in the host
computer or network access point.
The table below lists the menu items available, the values that may be selected, and the factory default value.
Following the table are detailed descriptions of each setup item. In the detailed descriptions an asterisk (*)
indicates the factory default value.
The Wi-Fi Interface menu items may be configured using either the Mobile Setup Utility or the printer’s
internal Control Panel Setup feature as described in
Appendix I
. Which setup method may be used is indicated
in the table below. Before using the Mobile Setup Utility, please read the following note and then refer to
Appendix H
.
Note
: In order to use the Mobile Setup Utility, communications must first be established between the host
device running the utility and the printer. This may require that you first use the Control Panel Setup
to establish communications and then use the Mobile Setup Utility for final configuration or to
configure items in other menus.
To access the WiFi Printer’s Web page, enter the IP address of the printer in the address bar of your browser on
any computer on the same network.
You will be immediately presented with a login dialog, enter the username “DPAC” and the password
“DPAC”.
38