EVO30
8
2.2
Faults and troubleshooting
The equipment runs through regular quality controls during production. Nevertheless, errors
or malfunctions on the equipment may occur. Individual parts are often the cause of faults and a
replacement is usually sufficient. Please use the following overview to see the most common errors
and how to repair them. If the equipment still does not work properly, please contact your contract
partner.
Error
Cause
Solution
Squeaking or cracking
noise
Loose or too fixed screw joint Check screw joint or lubricate
Cracking in the pedals Loose pedals
Tighten pedals
Machine is wobbling
Machine is not levelled
Align feet
Handlebar/saddle is
wobbling
Loose screws
Tighten screws
2.3
Maintenance and service calendar
The indoor cycle has to be cleaned with a moist towel (no solvents!) after every training session in
order to avoid any damages from body perspiration. The following routine works have to be done in
the given intervals:
Part
Weekly
Monthly
2x a year
Annually
Check screws
I
Check the brake for wear and
lubricate if required
I
Lubricate saddle and seat post
with silicone gel
I
Check the belt tension
I