7
II. Getting started
LJ-100
II. Getting started
#
How to connect the batteries
♦
Remove the cover of the battery
compartment on the underside of the base
unit.
♦
Fit three 1,5V AA batteries,
♦
Replace the battery compartment cover.
Note!
Instead of batteries, the adaptor to the DC9
V
socket, which is placed on the side of the base
unit can be connected. The parameters of the adaptor must be as follows:
!
inside voltage –
U
IN
= 230V, f =50 Hz
!
outside voltage–
U
out
= 9V DC
!
current
I
outmin =
100 mA
!
standard plug (
Φ
=2.1 mm)
with „-” inside.
Adaptor is not in complete!
#
How to mount the table stand
See below picture.