12
III. Using the telephone
LJ-100
#
How to make a call
To make a call:
♦
lift the handset from the base unit
or
♦
press the
SP-PHONE
button.
The display will show the timer.
♦
When the PTT on-line signal is heard, the
required number should be dialed. The
number will be displayed. After several
seconds, the call time counter will be
switched on.
♦
To end your conversation, replace the
handset on the base unit or press the
SP-PHONE
button. The time of your last
call can be displayed by pressing the
OUT/X
button (see the chapter: ”OUT
memory”)
Note!
The telephone number in the standby mode can also be entered (before lifting the handset or
pressing the SP-PHONE button).If you wish to delete the last incorrect digit, press the
DEL/TIME button. If you wish to make a call, press the BACK
÷
button. The 2-way speaker
function will be switched on and the number will be dialed automatically.
#
How to receive a call
When the telephone rings:
♦
lift the handset from the base unit or press
the
SP-PHONE
button.
In addition, on the side of the handset there is
the rotary switch, which can be used to adjust
the volume of the handset or the
VOLUME
HI/LOW
rotary switch to adjust the volume of
the base’s loudspeaker.
♦
After completing your conversation,
replace the handset on the base unit or
press the
SP-PHONE
button.
SP-PHONE
1
2
3
4
5
6
7
8
9
0
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
/
OPER
/
=
SP-PHONE
SP-PHONE
