Dartel LJ-100 User Manual Download

Page: 27 / 33

IV. Clip (Caller ID)- Calling line identification presentation

LJ-100

Press the

VIP/P

button. The display will

show the

VIP

symbol.

The above steps can be repeated for the
next number.

If no further buttons are pressed, the
telephone will return to standby mode after
several seconds. The settings will be stored.

To remove the VIP symbol :

press the

UP/+

DOWN/-

button to

select the VIP number.

Press the

VIP/P

button. The VIP symbol

will disappear from the display.

The above steps can be repeated for the next
number.

How to make a call from Clip memory

To make a call:

♦

press the

UP/+

DOWN/-

button to

select the number.

♦

Now, press the

BACK/

÷÷÷÷

. button. The

2-way speaker function will be switched
on and the number will be dialed
automatically.

♦

Replace the handset or press the

SP-PHONE

button to end the call.

Special case!

It may happen, that the number identified was stored without a prefix, which is
necessary to make long distance calls. Your telephone allows a prefix to be
added at the beginning of the number automatically. A prefix is added after
pressing the BACK

button twice. In Poland, the prefix used is

To make a call using a number without a
prefix:

♦

press the

UP/+

DOWN/-

button to

select the number.

♦

Press the

BACK/

÷÷÷÷

button twice. The

2-way speaker function will be switched

VIP/P

UP/+

DOWN/-

UP/+

DOWN/-

BACK/

SP-PHONE

UP/+

DOWN/-

BACK/

Summary of Contents for LJ-100


































Search results

Summary of Contents for LJ-100

Reviews:

Related manuals for LJ-100

Brands by name

Popular brands

Dartel LJ-100, User Manual

Search results

Summary of Contents for LJ-100

Reviews:

Related manuals for LJ-100

Brands by name

Popular brands