16
III. Using the telephone
LJ-100
will automatically be able to hear music. This function may be used, for
example, in offices while a client is on hold.
To switch the hold music on:
♦
inform the person on the other end of the
line about a music pause.
♦
Press the
SET/HOLD
button. The display
will show
Hold
. The telephone will start to
play music. The
NEW
indicator will light
up.
Note!
In activating this function using the UP/+ or DOWN/- button, you may select the melody you
wish the caller to hear. There are 8 melodies available, from which you can choose. These are
indicated by symbols from 01 to 08.
♦
You can replace the handset on the base.
The connection will not be interrupted.
The hold music will be heard through the
speaker located in the base unit of the
telephone.
♦
Lift the handset or press the
SP-PHONE
button to continue speaking. The Hold
function will be switched off.
Note!
If the handset is not replaced on the base, press the SET/HOLD button again to switch the hold
music off.
#
Memory
Your telephone can store 7 telephone numbers in the one-touch memory
and 10 telephone numbers in the two-touch memory. The number can
then be dialed by pressing one button or two buttons. The one-touch
memory locations are located under the buttons indicating
M1-M7
and the
two-touch memory locations are located under the buttons of the keypad.
Each number that is stored can have up to 16 digits.
!
One-touch memory
To store a number in the memory:
♦
press the
STORE
button. The display will
show
INPUt CodE_
.
SET/HOLD
SP-PHONE
STORE
