11
III. Using the telephone
LJ-100
To select one ringer melody:
♦
press the
SET/HOLD
button. The display
will show
- 0 1 2 3 4 5 6 7 -
.
♦
Press the
7
button. The display will show
an actual setting
rING 09
. The ringer
melody will be played.
♦
Press the
UP/+
or
DOWN/-
button to
select the right signal (melody).
♦
Press the
SET/HOLD
button to confirm
the setting. The display will show the
symbol
- 0 1 2 3 4 5 6 7 –
again.
♦
Press the
DEL/TIME
button. The
telephone will return to the standby mode.
If the
DEL/TIME
button is not pressed, the
telephone will return to standby mode after
several seconds. The setting will be stored.
Note!
The melody ringers are available only, when the batteries are
placed in the battery compartment. If there are no batteries,
only the normal ringer will sound.
#
2-way speaker function
The 2-way speakerphone function allows a number to be dialed, or a call to be
made, without the handset needing to be lifted. The party on the other end of
the line will automatically be able to hear and to be heard through the speaker
located in the base unit of the telephone. When using this function, the user
needs to speak within a reasonable distance of the telephone microphone in
order that the microphone may pick-up voice sound. This function may also be
used to make a conference call between several parties in the same office.
Using the
SP-PHONE
button, the 2-way speakerphone function can be
switched on/off.
After pressing the
SP-PHONE
button, the
display will show the timer.
In addition, the
VOLUME HI/LOW
rotary
switch can be used to adjust the volume of the
loudspeaker.
SET/HOLD
UP/+
DOWN/-
1
2
3
4
5
6
7
8
9
0
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
/
OPER
/
=
DEL/TIME
SP-PHONE
HI
VOLUME
LO
W