11 MRS v1.7
REPLACING THE PAPER :
1- For the MRS x2xx: tear off the rewinded paper first.
2- Unscrew the two unremovable screws (1 and 2). The panel ( 3 ), in front of
the revolving door, can then be removed.
3- Open the revolving door ( 7 ) giving access inside the printer.
4- Tear the paper coming from the paper roll ( 8 ). For a moment close the
revolving door and remove the paper staying in the printing head.
5- Remove the old paper roll and its paper axis from the paper holder.
6- Make a frank cut at the end of the new paper roll, but do not install it on the
support (printing would start immediately). The strip of paper must hang
forward to the roll. Insert the extremity of the paper between the two lips of the
printing head ( 9): the first lip is in plastic and the second is in metal.
For the MRS x2xx, put the strip of paper between the paper rewinder ( 10 )
and the back of the printing head ( 11 ).
7- Make a paper advance while maintaining engaged the paper.
8- Introduce the paper axis into the new roll. Insert both into the paper holder.
9- Then follow the procedure " REPLACING OF THE INK CARTRIDGE" from
step 5
..
P
age
Page: 7 of 8.
