PVE400M USER’S GUIDE
3.6 Upgrading firmware
The PVE400M firmware can be upgraded using the
UPGRADE
tab.
Figure 12. Firmware upgrade page
The update image can be accessed using
FTP
protocol. Type
URL
for the firmware image and press the
[
Upgrade
] button. In case of successful connection, the upgrade process will take 5-10 minutes. Do not
interrupt the power supply within this period. Once the update process is finished, PVE400M will automatically
reboot. Check the
LED
status, as soon as the device is booted up, and reconnect the browser. Power off/on
cycle is recommended after the upgrade procedure.
If the status after the upgrade reports an error, check the network connection to upgrade site, if it can be accessed
from the network segment of the working PVE400M. The firmware image can be downloaded from the
Internet
and placed to a
local
FTP
site, within the
MeshManager
infrastructure, to make easy access from PVE400M.
In order to upgrade directly from the
external
FTP
site, make sure that
Gateway
setting is properly assigned. If
DNS
settings are not provided, use
IP
address for
URL
Default location for updates from Darim Vision FTP site will be
ftp://ftp.darim.com/pub/PVE/uImage.dat
or
ftp://216.55.162.11/pub/PVE/uImage.dat
Copyright © 2007 Darim Vision Co, All Rights Reserved
- 20 -