PVE400M USER’S GUIDE
Figure 8. Video and Audio configuration page
PVE400M can operate in
PAL
or
NTSC
mode. The
Video Standard
field represents the current selection of the
video standard.
Using the
Capture Resolution
drop-down list you can choose a required resolution. Currently four different
resolutions are supported.
The
Video Frame Rate
drop-down list allows selecting the target frame rate (in frames per second). It depends
on the link quality and the actual frame rate can vary, but it will not exceed the specified value in this field.
The
Video Encoder Target Rate
parameter field serves for specifying maximum allowed bit rate for video
compression. It depends on the link quality, and the actual bit rate can vary, but it will not exceed the set value
of this field. Make sure you have selected the adequate bit rate for existing network condition.
The
Audio mode
field allows selecting a required audio format. If the external microphone connected to PVE-
AV cable, choose a desired compression format from the list. Use the
No audio
option if the microphone is not
used.
The
Camera brightest/contrast/hue/saturation
parameters will adjust picture quality, similar to regular
settings of TV set.
PVE400M uses
MPEG4
compression for video. When the wireless connection is used, the video bit rate is
Copyright © 2007 Darim Vision Co, All Rights Reserved
- 16 -