D A R C H E . C O M . A U
ATTACHING LED STRIPS AND STORAGE GRID
STEP 1.
Place the LED strips along the inside edges of the RTT lid
then secure them by screwing the LED strip brackets into
the pre-drilled holes in the tent with phillips head screws.
Note that the two long strips go on the top and bottom
edges and the two short strips go on the left & right edges.
STEP 2.
Connect the LED strips together with the supplied
cables. The 5m USB cable can be connected at either of
the bottom corners to suit your setup.
STEP 3.
Screw the storage grid mounts into the pre-drilled holes
on the inside of the RTT lid with phillips head screws.
STEP 4.
Attach the storage grid with the carabiners.