EMX Alpha / Beta / Delta / Gamma / Omega Ranges
WARNING READ INSTRUCTIONS CAREFULLY BEFORE USE
INFLATABLE INSTRUCTIONS
Recommended procedure below. For safety reasons it is recommended that 2 persons set up any Inflatable Tent.
Ensure area is free from any sharp objects & overhead objects.
SETUP - INFLATION
Remove Inflatable Tent from
Protective Cover.
Lay the Inflatable Tent out flat.
Roll out the Inflatable Tent.
ONE
TWO
THREE
Each leg on the
Inflatable Tent
has a valve.
Select valve to attach pump, screw inflatation
value closed and leave cap off.
On all other valves screw tight and fix cap.
Inflatable Tent Accessories*
Layout your Walls and Awnings and
confirm positioning.
Attach the accessories using zips.
SIX
FOUR
FIVE
During the inflation process raise legs
into the center until all legs are upright.
Ensure all legs are lined up and canopy
is centered. Check frame is firm.
Connect the pump to selected Inflation
Valve and begin inflation.
SEVEN
EIGHT
NINE
Fix Stakes and Guide Ropes or attach
Sandbags.
Over pressure relief valve system
DO NOT TOUCH.
IMPORTANT NOTES:
Check the wind and weather
conditions before commencing
construction.
Ensure you have the correct ground
fixings for your application.
When the tent is in use, do not leave
your tent unattended.
TEN
We Design
|
We Manufacture
|
We Sell
|
We Deliver America Wide
www.extremecanopy.com [email protected] (888) 201 1968
