background image

D A R C H E . C O M . A U

USING LED LIGHTING

An LED light strip may be supplied with this RTT. This LED light strip comes with a USB connection that requires an 
external power supply from a USB portable power bank (power bank not supplied).
Any alterations to this electrical system may cause a safety risk and will void the product warranty

•  Check the rating of the outlet before connecting the light to avoid a dangerous situation.

•  ONLY

 connect this light to a suitably rated outlet.

•  DO NOT

 stare at the light source as it may cause damage to your eyes.

•  This light has been specially designed and should only be used with this product.
•  Not suitable for use in any other application other than its intended purpose.
•  Disconnect power supply to LED when RTT is closed.

USING INTERNAL STORAGE

The internal side pockets, storage grid, and hooks are for stowing light objects only. Damage due to improper 
loading will not be covered under warranty.

CARE & STORAGE INSTRUCTIONS

1.  Remove dirt with a soft brush and cold water after use.
2.  Do not clean with soap, detergent, petrol, oil or solvents.
3.  Ensure RTT is completely dry before storing.
4.  Correct storage is vital for the longevity of your RTT. If on occasion the RTT is required to be stowed wet, 

it is essential it is unpacked and dried as soon as possible. Water damage, mildew damage and incorrect 
storage is not covered under warranty.

5.  It is recommended that you open your RTT periodically between use to inspect the material and allow 

it to  dry out.

6.  If spot mould is visible, brush it off with a stiff bristle nylon brush and vacuum the area to get rid of any residual spores.

STRUCTURAL INTEGRITY

This RTT has been designed for general camping in normal conditions. This RTT is designed as a temporary shelter, 
not a permanent structure. Do not leave up for extended periods and do not leave unattended.
To avoid the chance of personal injury and or property damage, DARCHE® recommends this RTT should not be 
erected or used in extreme weather conditions.
Your vehicle should not be moved while the RTT is deployed.

Summary of Contents for HIGHLAND 1300

















Reviews: