D A R C H E . C O M . A U
BEFORE MOUNTING YOUR ROOF TOP TENT
ATTACHING LADDER MOUNTS
The ladder mounts can be attached to either the long side or the short side of the RTT to suit your setup.
WHAT YOU’LL NEED:
• 5mm Hex Key
• Phillips Head Screwdriver
STEP 1.
To attach the ladder mounts, insert two M8 square nuts
into each of the T-channels in the base of the tent.
Depending on the location, you may need to adjust or
temporarily remove the pre-attached latches or badges.
STEP 3.
Repeat with the second ladder mounting bracket. Ensure that the spacing between the brackets corresponds with
the spacing between the ladder hooks.
STEP 2.
Insert M8 x 13mm button head hex socket bolts
through the ladder mounting bracket, align them
with the square nuts in the T-channels then tighten.
STEP 1.
To attach the handles, insert four M8 square nuts in
the T-channel in the lid of the tent. Depending on the
location, you may need to adjust or temporarily remove
the pre-attached latches.
ATTACHING HANDLES
The handles can be attached to either the long side or the short side of the RTT to suit your setup.
STEP 2.
Insert M8 x 16mm button head hex socket bolts
through the handle and handle badge, align them
with the square nuts in the T-channels then tighten.
