6
I N S T R U C T I O N M A N U A L
ATTACHING SPRING POLE MOUNTS
STEP 1.
Insert two M6 square nuts into each end of the upper
T-channel in the base at the front of the tent. With
the spring pole mounts pointing outwards, insert
M6 x 12mm button head hex socket bolts through the
spring pole mount & spring pole mount base, align them
with the square nuts in the T-channels then tighten
at the locations specified. Note that the spring pole
mounts should be pointing outwards.
Spring Pole Mount
Spring Pole Mount
Spring Pole
Mount
Spring Pole
Mount
Ladder Mount
Ladder Mount
Latch
Latch
Handle
Handle
STEP 2.
Repeat the same process on each of the short sides of
the tent at the locations specified.
SUGGESTED LADDER MOUNT AND HANDLE POSITIONS:
20m
m
350m
m
1000
mm
330mm