Page 38 of 43
Rotation arm (Wall version)
If the Rotation arm starts to drift then the wall plate may have become uneven; to correct this
issue you will need to adjust the relevant nuts on the mount fixings to balance the rotation
arm. The rotation arm can also have its tension adjusted by using a flat blade tool in the grub
screws located on each side of the arm boss.
Lighthead arm (all versions)
The side turning movement of the lighthead arm is controlled by the central tension screw as
indicated here.
Lighthead (all versions)
The tilting / forward and backward movement of the lighthead itself can be tightened by using
the tension screw located underneath a blue rubber bung at the rear base of the light as shown
below.
Tension grub
screw for
arm rotation
Summary of Contents for SL730 Series
