Page 28 of 43
4.4.2 Lighting configuration
Daray’s standard mounting recommendation is to have the wall plate directly bolted into the
structure of an open surface when possible.
Ultimately the mounting method used is the responsibility of the project engineer or fitter. This
includes the specification of attachment hardware, lateral bracing and the suitability of the
surface to be fixed to.
4.4.3 Installing the wall plate
Fig.2 Fig.3
To install the wall plate you may need more than 1 person. Align the mount to the
wall and mark your fixing points. Ensure the light is completely true on both the
horizontal and vertical planes.
It is essential that this mount is true on both planes as otherwise it may cause the
arms to swing uncontrolled.
With the fixing bolts secured, place a nut onto each of the fixings, then mount the
plate onto the wall. Place a final nut onto the fixing bolt to lock the design in place.
Summary of Contents for SL730 Series
