DARAY SL730 Series, Operating & Installation Manual

Page: 28 / 48

Page 27 of 43
4.4 Wall Mounted Version
Fig.1
The wall structure must be load bearing.
Power Supply Please take the length of the supplied Power Cable into
consideration when deciding on the location and placement
of your unit.
Heavy or Difficult fittings Fitting the mounting plate can be difficult and aspects of the
fitting may require more than one person; this work should
only be attempted by appropriate and competent personnel.
Existing Environmental Factors When fitting, considerations have to be taken for existing
services such as; cabinets, vents, light switches, etc. along
with interior wall construction and any surrounding hazard.
Environmental Responsibility Once our products are installed all packaging should be
disposed of and recycled appropriately and in accordance
with local governing regulations.
The normal life span of the SL730 series is up to ten years.
We recommend the equipment should be discarded and
recycled when reaching the end of its life
.
These instructions are based on the assumption of a fresh fit into a room with no previous
lighting structures. With installations onto sites with equipment already in place, we
recommend that the previous lights’ mounting plates be removed and the new ones fitted as if
into a fresh fitting.
After concluding the structural stability of the wall structure it will be necessary to assess the
construct and decide on the best course of action for installing the wall plate.
4.4.1 Attachment methods
The wall mount system is split into 3 parts, the fixing plate and primary arm boss, the
suspension arm and the light head. Please note, the recommended installation height is with
the bottom of the suspension arm’s rigid section being no lower than 1.9m.
Note: The wall mounting plate should be installed on a load bearing wall.