©
National Instruments Corporation
xi
PCI-MIO E Series User Manual
About
This
Manual
This manual describes the electrical and mechanical aspects of each
board in the PCI-MIO E Series product line and contains information
concerning their operation and programming. Unless otherwise noted,
text applies to all boards in the PCI-MIO E Series.
The PCI-MIO E Series includes the following boards:
•
PCI-MIO-16E-1
•
PCI-MIO-16E-4
•
PCI-MIO-16XE-10
•
PCI-MIO-16XE-50
The PCI-MIO E Series boards are high-performance multifunction
analog, digital, and timing I/O boards for PCI bus computers. Supported
functions include analog input, analog output, digital I/O, and timing
I/O.
Organization of This Manual
The
PCI-MIO E Series User Manual
is organized as follows:
•
Chapter 1,
Introduction
, describes the PCI-MIO E Series boards,
lists what you need to get started, describes the optional software
and optional equipment, and explains how to unpack your
PCI-MIO E Series board.
•
Chapter 2,
Installation and Configuration
, explains how to install
and configure your PCI-MIO E Series board.
•
Chapter 3,
Hardware Overview
, presents an overview of the
hardware functions on your PCI-MIO E Series board.
•
Chapter
4,
Signal Connections
, describes how to make input and
output signal connections to your PCI-MIO E Series board via the
board I/O connector.
•
Chapter 5,
Calibration
, discusses the
calibration procedures for
your PCI-MIO E Series board.
