USB3-FRM13 User’s Manual
3
1. Introduction
USB3-FRM13 is an image acquisition board to support Full configuration camera Link compatible
cameras. Acquire images in real time and directly transferred to the system memory. Easy installation
and fast image transfer is a suitable device to meet the needs of the industry's low-cost, high-
efficiency.
The sample program provided by the DQ system is provided in the form of a source so that the API
provided to use the board can be tested briefly, so the user can modify it and use it. Refer to Chapter
5 Sample Program for detailed explanation.
The Mini MDR 26-pin connector can connect with Camera Link compatible cameras, the bottom
connector (J8) supports Base Camera Link Configuration, and the top (J4) connector supports
Full/Medium Camera Link Configuration with the bottom connector. In addition, it has the function of
external control by providing 4 pairs of RS-422 signal lines and 6 TTL level Line/Area Trigger signals.
Please refer to 3-3 Connector Pin-Out for detailed explanation.
This is a board that transmits the captured image frame to the PC through the PCI Express 1x
interface method in conjunction with the standard Camera-link camera. The operation of the board is
controlled by the program API, and the figure below shows the interlocking operation of the board.
[Figure 1-1. USB3-FRM13 Board Usage]
