PCIe-OPT01 Users Manual (Rev 1.0)
-
20-
http://www.daqsystem.com
4.4 Power/Digital/IO related functions
(1)
“Set VIO” button
Set by specifying the sensor voltage value. (0 ~ 3.3V)
(2)
Digital I/O(USER;Sensor;User3.3V;PWR)
:
Selection
(Power Board Connection Standard)
PCI_DIO_XXXX
: User GPIO (General Purpose I/O) MIPI-OPT06/08 Refer to board
manual
PCI_SDIO_XXXX
: Sensor GPIO (General Purpose I/O) MIPI-OPT06/08 Refer to board
manual
PCI_DIO33_XXXX
: User 3.3V GPIO (General Purpose I/O) MIPI-OPT06/08 Refer to board
manual
PCI_PWR_DIO_XXXX
: Power GPIO GPIO (General Purpose I/O) MIPI-OPT06/08 Refer to
board manual
(3)
“Set Dir” button
Set whether to use each GPIO port as an input or output.
If the end bit is “0”, it is an input, and if it is “1”, it is an output.
(4)
“Output” button
Output the desired value to the output port.
(5)
“Get Input” button
Read the input value.
