PCIe-OPT01 Users Manual (Rev 1.0)
-
19-
http://www.daqsystem.com
(16)
“Read ID” button
Shows MIPI ID.
4.3
Clock related functions
(1)
“PGM Clk” toggle
Select the corresponding Sensor Clock.
(2)
“Set” button
It is set according to the frequency set next to Sensor Clock. In the above case, it is set
to 10MHz.
(3)
“Set 6M” button
Set the sensor clock to 6MHz.
(4)
“Set 16M” button
Set the sensor clock to 16MHz.
(5)
“A/CHG” toggle
If checked, Min. Max. It is possible to test by periodically setting the interval of the
frequency specified as by Step.
Ex) In the above case, the frequency increases in 0.5MHz increments between 5 and
30MZ, and the period increases in increments of 0.5 x 1000ms = 500ms with the
number next to A/CHG.
