PCIe-FRM11 User’s Manual (Rev 1.4)
-
34
- http://www.daqsystem.com
6. Test
6.1 Image Frame Test
In this chapter, the functional test will be explained to discriminate board mal-functions and for
the user being familiar with the operation of the board. It is performed using the sample program
“FrmTest.exe”
on PC equipped with the PCIe-FRM11 board.
Image Frame
Simulator
PCIe-FRM11
BOARD
Camera
Link
Photo coupler
Interface Circuit
[Figure 6-1. Equipment Connection for Testing]
Figure [6-1] shows connection of the equipments. Although the PCIe-FRM11 is shown outside
the PC in this figure, but actually it is located in a PCI slot inside the PC. The image frame data is
generated in the Image Frame Simulator made by DAQ System. If you have real camera or a frame
source, you can use it.
At this connected state, turn the all power on and execute test program (“FrmTest.exe”) on the PC.
Follow the steps to test the function of receiving image frame data.