PCIe-FRM11 User’s Manual (Rev 1.4)
-
28
- http://www.daqsystem.com
(8)
„FRAME Read‟ button
Press this button to read the image frame data of the board to your PC. If image frame data is
not saved on the board, you must wait until the end of data collection.
[Figure 5-2. When “Frame Read” is executed]
(9)
„Save Data‟ button
It is used to save the frame image data read to PC as file (* .bin).
You can select the folder to save. By default it is set to D: \ SAVE folder.
(10)
„Video Frame Mode‟ selection
Select Video Frame Mode from Progressive or Interlace. (Not used)
(11)
„Video Data Bits‟ selection
You can select Video Input Mode 8bit, 16bit YUV, 24bit BGR.
(12)
Shift Bits
0 ~ 8bit Shifts the image file to the right by the selected bit.