DAPAudio Powermix 2, Product Manual

Page: 21 / 22

19
Product Specification
Model: DAP Audio Powermix 2
Power 230 V
Dimensions 540 x 520 x 225 mm (LxWxH)
Weight 23.9 Kg
Mono Inputs
Mic Input electronically balanced
Frequency response 10 Hz to 60 KHz ±3 dB
Distortion (THD & N) 0.007% at +4dBu, 1Khz, Bandwidth 80 KHz
Mic E.I.N. (22 Hz – 22Khz) -129.5 dB, 150 Ohm source
-117.3 dB, 150 Ohm source
-132 dB, input shorted
-122 dB, input shorted
Gain Range +10 dB to + 60 dB
SNR 113.6 dB
Line Input electronically balanced
Frequency response 10 Hz to 60 KHz ±3 dB
Distortion (THD & N) 0.007% at +4dBu, 1Khz, Bandwidth 80 KHz
Sensitivity range +10 dBu to –40 dBu
Stereo Inputs
Line Input unbalanced
Bandwidth 10 Hz to 55 KHz ±3 dB
Distortion (THD & N) 0.007% at +4dBu, 1Khz, Bandwidth 80 KHz
Equalization
Hi Shelving
12 KHz +/-15 dB
Mid EQ 2.5 KHz +/-15 dB
Low Shelving 80 Hz +/-15 dB
Master Mix Section
Noise Bus noise, fader 0 dB, channels muted:
-100 dBr (ref: +4dBu), fader 0 dB, all input channels assigned and set to Unity
Gain: - 88.5 dBr (ref: +4dBu)
Max Output +22 dBu balanced XLR, +22 dBu unbalanced 1/4” jacks
Aux Returns Gain range OFF to Unity to +20 dB
Aux Send Max Out +22 dBu unbalanced
DJ Lamp 12 V DC 400mA
Inner DSP effect processor
A/D, D/A 24-bit
Sample rate 48 Khz
Effects 16
Stereo Amplifier Out
2 x 400 W RMS at 8 Ohm, THD = 1%
2 x 600 W RMS at 4 Ohm, THD = 1%
Headphone 2 x 115mW at 32 Ohm
Monitor Amplifier Out
200 W RMS at 8 Ohm, THD = 1%
300 W RMS at 4 Ohm, THD = 1%
Design and product specifications are subject to change without prior notice.