11
17. SIGNAL Indicator
The Signal indicator shows a channel’s incoming signal level at all times. The green
Signal LED will according to the rhythm of the incoming signal. If not, you should
increase the input level by using the gain control. The Signal LED lights 30dB below
clipping.
18. Channel Fader
A high-quality true logarithmic 60mm fader, which controls the volume of a single
channel and to establish an accurately proportioned mix of all input signals. The
channel faders should be positioned within the range of -5dB to 0dB, leaving you with
sufficient room to allow precise matching of differences in the channel’s level settings.
The overall volume is set with the master fader. Even though the channel faders offer
an additional gain of +10dB, it is better not to exceed the +5dB position.
19. FX 1 Fader
A high-quality true logarithmic 60mm fader,
which controls the FX 1 output level.
20. FX 2 Fader
A high-quality true logarithmic 60mm fader,
which controls the FX 2 output level.
21. AUX 3 Fader
A high-quality true logarithmic 60mm fader,
which controls the Aux output level (
65
).
22. MONO OUT Fader
A high-quality true logarithmic 60mm fader,
which controls the Mono output level (
78)
.
23. MONITOR Fader
A high-quality true logarithmic 60mm fader, which
controls the monitor amplifier output level (
89
).
24 / 25. MASTER Fader
A high-quality true logarithmic 60mm fader, which controls the Left and Right amplifier output levels (
87
+
88
).
LEFT and RIGHT Stereo fader for adjusting the overall volume as well as the output level of the internal
power amplifiers and the MASTER A OUTPUTS (
79
).
Please, make sure to close the fader of the corresponding input channel or at least the MASTER
controls before connecting any audio signal sources. This will save yourself, your audience, and
your equipment from unnecessary stress resulting from plug-in noise.
Summary of Contents for Powermix 2
Page 1: ...Powermix 2 ORDERCODE D2222...
Page 22: ...2005 DapAudio...
