DAP Technologies MICROFLEX CE8000, User Manual

Page: 47 / 62

43
_MAN40-A (CMU040-A3)
BARCODE LASER SCANNER
(CE8000LS)
The CE8000LS is a standard CE8000 on which a Laser Barcode Reader has
been installed.
The functioning of the Laser Barcode Reader is mainly under the control of
an application program and a special software driver. You should refer to
your application program user’s guide for complete details.
The following is basic information on laser barcode reading.
•
Point the top of the CE8000LS toward the barcode label to read.
•
Press the SCAN Button found on the back of the unit and move the
CE8000LS back and forth to assure you that the beam will completely
cross the label.
Two proper ways to scan a label
Two improper ways to scan a label
FIGURE 16
SCANNING A LABEL
•
You will hear a short beep when the label is decoded and the laser led
will turn green.
•
You can release the SCAN Button at any time to stop the scanning.
Two short beep will be generated to indicate the end of the scanning
•
If you keep the SCAN Button pressed for too long the scanning will
stop by itself after a certain time. You will hear two beeps meaning that
no barcode has been decoded.
Refer to the CE8000 Series Technical Guide for more information about
usage and the programming.
CAUTION - Use of controls, adjustments or performance of procedures
other than those specified herein may result in hazardous laser light
exposure.
Do not intentionally look at the laser beam.
1
1
2
2
Laser Button at
the back of the
unit