DAP Technologies MICROFLEX CE8000, User Manual, Page: 34 / 62

30
_MAN40-A (CMU040-A3)
When the Backup Battery Very
Low message appears the backup
battery is so low that data and
programs could have been corrupted.
Replacing the
main battery
It is preferable to replace the main battery in a clean and dry area. Make sure
that neither water nor dust can enter the CE8000 Series unit.
NOTE: The CE8000 Series unit as an integrated hardware/software
system that allows user to remove the battery without
having to turn off the unit.
Even if the system is safe enough in most applications, we
highly recommend to turn-off the unit before removing the
battery
The CE8000 Series unit uses a specifically designed and tested main battery
to insure quick charging time, long-battery life and to withstand shocks and
vibrations. To be sure that the battery is conform for usage on a DAP
equipment, buy them directly from DAP TECHNOLOGIES or one of its
distributors (Part number DCCE800-Y or DCCE800-G) and check for the
DAP label on it.
Replacement of the main battery is an easy task. Follow the steps outlined
below.
FIGURE 13
BATTERY COMPARTMENT
FIGURE 12
BACKUP BATTERY VERY LOW