manualshive.com logo in svg

DAP Technologies MICROFLEX CE8000, User Manual, Page: 15 / 62

Share
Download
DAP Technologies MICROFLEX CE8000 User Manual Download Page 15

11

_MAN40-A (CMU040-A3)

CE CONFORMITY CE8000LS

The CE8000LS meets the 89/336/EEC directive intent for Electromagnetic Compatibility
Compliance when used with DAP’s accessories.

The compliance was demonstrated to the following specifications as listed in the official
Journal of the European Communities:

Emissions:

EN 55022

Radiated  & conducted, CLASS B

CISPR 22:1997-11

For CLASS B

EN 61000-6-2:2001, Electromagnetic Immunity:

IEC 61000-4-2:1995

Electrostatic discharge (ESD)

IEC 61000-4-3:1996

Radio Frequency Electromagnetic Field Amplitude
Modulated

IEC 61000-4-4:1995

Fast Transients

IEC 61000-4-5:1995

Surges Line-to-earth, Line-to-Line

IEC 61000-4-6:1996

Radio Frequency Continuous Conducted

IEC 61000-4-11:1994 Voltage Interruption

Safety of Laser Product

IEC 60825-1:1993+ A1:1997 + A2:2001 Class 2, Laser Safety Approvals

US Federal (FDA) Regulation

21 CFR Chapter I, Subpart J, Part 1040.10

Performance Standards for Light Emitting Products

(Class II Laser Product)

Summary of Contents for MICROFLEX CE8000































































Reviews:

No comments