DAP Technologies MICROFLEX CE8000, User Manual

Page: 25 / 62

21
_MAN40-A (CMU040-A3)
Align the red dot located on the LEMO connector’s end of the cable with the
red dot found on the round connector located on the top right of the CE8000
Series unit and insert connectors one into the other.
Note: For communication, if your CE8000 Series unit has two
round connectors (LEMO connector) use the right one.
Either of them can be used for charging.
The Battery Status Indicator (Figure 2) will turn red in the next five (5)
seconds indicating that charging is in progress and will become green when
the full charge is completed. This could take up to five (5) hours. The led
could turn on immediately green if the unit is fully charge.
If the unit was turned off, it should turn back on after a few seconds.
Processing will resume exactly where it was interrupted once recharging
starts.
Communication
Cradle
No information where available at the time this document was printed
Automatic
Shutoff
You generally do not have to worry about turning off the CE8000 Series unit
to save the battery. If the unit remains inactive for more than three minutes, it
will turn off automatically. The unit will save the exact status of your
application program and data before turning off.
The CE8000 Series unit is turned off when the display is empty and the
keyboard does not beep when a key is pressed. To restart, use the normal
start-up procedure. Once restarted, you can resume your task where you left
off.
When turned off with fresh batteries, you can store the CE8000 Series unit
for several days without needing to recharge them. Refer to section
MAINTENANCE AND STORAGE for more information about storing the
unit.
Turning The
Unit ON
Simply press the key on the keyboard. The CE8000 Series screen will
normally activate.
It could occur that the battery is really too low to start the unit when pressing
the key. In that case refer to paragraph “Charging the battery” under
section GET READY to know how to charge it.
Out of the charger, the unit will normally turns off by itself after about three
(3) minutes.
To turn ON the CE8000 Series unit, simply press the key on the
keyboard. The unit screen will normally activate.
It could occur that the battery is too low to start the unit when pressing the
key. In that case refer to section BATTERY AND CHARGING for
changing instructions.