background image

13

_MAN40-A (CMU040-A3)

MICROSOFT'S END USER LICENSE

AGREEMENT

You have acquired an item (“DEVICE”) that includes software licensed by DAP Technologies from Microsoft Licensing Inc.
or its affiliates (“MS”). Those installed software products of MS origin, as well as associated media, printed materials, and
“online” or electronic documentation (“SOFTWARE”) are protected by copyright laws and international copyright treaties, as
well as other intellectual property laws and treaties. The SOFTWARE is licensed, not sold.

IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT (“EULA”), DO NOT USE THE DEVICE OR
COPY THE SOFTWARE. INSTEAD, PROMPTLY CONTACT DAP TECHNOLOGIES FOR INSTRUCTIONS ON
RETURN OF THE UNUSED DEVICE(S) FOR A REFUND. 

ANY USE OF THE SOFTWARE, INCLUDING BUT NOT

LIMITED TO USE ON THE DEVICE, WILL CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR
RATIFICATION OF ANY PREVIOUS CONSENT).

GRANT OF LICENSE.

 The SOFTWARE is licensed, not sold. This EULA grants you the following rights to the

SOFTWARE:

¾

You may use the SOFTWARE only on the DEVICE.

¾

NOT FAULT TOLERANT.

 THE SOFTWARE IS NOT FAULTED TOLERANT. DAP TECHNOLOGIES HAS

INDEPENDENTLY DETERMINED HOW TO USE THE SOFTWARE IN THE DEVICE, AND MS HAS RELIED
UPON DAP TECHNOLOGIES TO CONDUCT SUFFICIENT TESTING TO DETERMINE THAT THE
SOFTWARE IS SUITABLE FOR SUCH USE.

¾

NO WARRANTIES FOR THE SOFTWARE. 

THE SOFTWARE is provided “AS IS” and with all faults. THE

ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE, ACCURACY, AND EFFORT
(INCLUDING LACK OF NEGLIGENCE) IS WITH YOU. ALSO, THERE IS NO WARRANTY AGAINST
INTERFERENCE WITH YOUR ENJOYMENT OF THE SOFTWARE OR AGAINST INFRINGEMENT.

 IF YOU

HAVE RECEIVED ANY WARRANTIES REGARDING THE DEVICE OR THE SOFTWARE, THOSE
WARRANTIES DO NOT ORIGINATE FROM, AND ARE NOT BINDING ON, MS.

¾

Note on Java Support.

 The SOFTWARE may contain support for programs written in Java.  Java technology is not

fault tolerant and is not designed, manufactured, or intended for use or resale as online control equipment in hazardous
environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft navigation or
communication systems, air traffic control, direct life support machines, or weapons systems, in which the failure of Java
technology could lead directly to death, personal injury, or severe physical or environmental damage. Sun Microsystems,
Inc. has contractually obligated MS to make this disclaimer.

¾

No Liability for Certain Damages. 

EXCEPT AS PROHIBITED BY LAW, MS SHALL HAVE NO LIABILITY FOR

ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THE SOFTWARE. THIS LIMITATION SHALL
APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE. IN NO EVENT SHALL MS BE LIABLE
FOR ANY AMOUNT IN EXCESS OF U.S. TWO HUNDRED FIFTY DOLLARS (U.S.$250.00).

¾

Limitations on Reverse Engineering,  Decompilation, and Disassembly.

 You may not reverse engineer, decompile,

or disassemble the SOFTWARE, except and only to the extent that applicable law notwithstanding this limitation
expressly permits such activity.

¾

SOFTWARE TRANSFER ALLOWED BUT WITH RESTRICTIONS.

 You may permanently transfer rights under

this EULA only as part of a permanent sale or transfer of the Device, and only if the recipient agrees to this EULA. If
the SOFTWARE is an upgrade, any transfer must also include all prior versions of the SOFTWARE.

EXPORT RESTRICTIONS.

 If these licensing terms are not labeled “North America Only Version” and the SOFTWARE is

not identified as “North America Only Version” on the SOFTWARE packaging or other written materials, then the following
terms apply: Export of the Department, Bureau of Export Administration (BXA). You agree to comply with the EAR in the
export or re-export of the SOFTWARE: (i) to any country to which the U.S. has embargoed or restricted the export of goods
or services, which as of May 1999 include, but are not necessarily limited to Cuba, Iran, Iraq, Libya, North Korea, Sudan,
Syria, and the Federal Republic or Yugoslavia (including Serbia, but not Montenegro), or to any national of any such country,
wherever located, who intends to transmit or transport the SOFTWARE back to such country; (ii) to any person or entity
who you know or have reason to know will utilize the SOFTWARE or portion thereof in the design, development or
production of nuclear, chemical, or biological weapons; or (iii) to any person or entity who has been prohibited from
participating in U.S. export transactions by any federal agency or the U.S. government. You warrant and represent that neither
the BXA nor any other U.S. federal agency has suspended, revoked or denied your export privileges. For additional
information see http://www.microsoft.com/exporting/.

Summary of Contents for MICROFLEX CE8000































































Reviews: