4-2 DAP Technologies
Managing Power
Battery Pack
The operating time of a fully charged battery pack depends on how you use the
device.
When you use applications that often access peripherals, or when you stay
connected to a wireless network, the operating time of the battery may be
shortened.
WARNING:
• Do not disassemble the battery pack. There are no user-serviceable parts inside. Doing so
may present risk of exposure to harmful chemicals, explosion or fire.
• Contact your local waste disposal service provider regarding the disposal or recycling of used
battery packs.
Charging the Battery Pack
Perform one of the following, to charge the battery pack(s):
Via M9020
1. With the battery pack(s) installed, plug the DC cord of the AC adapter into
the power connector of M9020.
2. Plug the female end of the AC power cord into the AC adapter.
3. Then plug the male end of the AC power cord into an electrical outlet.
1
2
3
CAUTION:
• When you disconnect the AC adapter, disconnect from the electrical outlet first and then from
M9020. A reverse procedure may damage the AC adapter or M9020.
• When unplugging the connector, always hold the plug head. Never pull on the cord.
